HEX Sting D350 acoustic guitars
HEX Sting D350 acoustic guitars

Sting D350

MSRP 329.00 USD

Solid top-upgraded guitars for performers
Gently-voiced fully expressive tonal range
Rich bass and smooth sound

KEY FEATURES
Dreadnought body
Solid-sitka spruce top
Premium grade rosewood body
Woofer Line for a rich bass
Fretboard with rounded edge profile
Rosewood headplate with bevel cut
Solid hard maple bridge plate with hexagonal holes
Multiple bindings
Abalone and brown ABS rosette
Oiled bone nut and saddle
Gloss finish on the body
Matte finish on the neck
Standard gig-bag

HEX Sting D350 acoustic guitars
HEX Sting D350 acoustic guitars
Hex Sting Series

For the serious players or musicians

In order to maximize the resonation of the Sting series' solid wood sound table, careful attention is given to its most meticulous details. From the woofer line to the bold sound and thinly applied light matte finish, both the sound and aesthetics of this instrument have been thoroughly considered in its design.

HEX Sting D350CE acoustic guitars
HEX Sting D350CE acoustic guitars

Sting D350CE

MSRP 429.00 USD

Sting D350 features and
Cutaway body
Pre-amp and pick-up set

KEY FEATURES
Dreadnought body
Solid-sitka spruce top
Premium grade rosewood body
Woofer Line for a rich bass
Fretboard with rounded edge profile
Rosewood headplate with bevel cut
Solid hard maple bridge plate with hexagonal holes
Multiple bindings
Abalone and brown ABS rosette
Oiled bone nut and saddle
Gloss finish on the body
Matte finish on the neck
Standard gig-bag
Fishman® Sonitone electronics

HEX Sting D350CE acoustic guitars
HEX Sting D350CE acoustic guitars

Body

Quality spruce and genuine rosewood

Made with a highly resonant solid spruce top and a rosewood body that produces a smooth, fully expressive tonal range, the D350 is an acoustic guitar with a feminine and full sound.

Shape Dreadnought
TopSolid sitka spruce w/ Woofer Line
Sides & BackRosewood
BracingHEX® scalloped X-brace
HEX Sting D350 acoustic guitars' body
HEX Woofer lines on top wood

Body inside

Woofer Line

The Woofer Line along the inside edge of the top wood helps to further deepen the central area around the groove. It is the similar effect as woofer loudspeakers, which makes the presence of bass sound one step clear.

Craftsmanship

Natural woodworking

Vacuum pressing & natural wood drying combined technology gives you a more solid sound. After the glue penetrates the pores of the wood sufficiently, it is bonded by slowly applying pressure to increase vibration and durability.

※ Although heat-drying and hot-press methods expedite the building process, they cause the adhesives to harden, interfering with the wood’s natural resonant qualities.

Wood joining technique of HEX guitars
HEX Hive acoustic guitars' neck

Neck

Sturdy without deformation

The Indonesian mahogany neck is built of three-stage drying to minimize deformation. It has a standard-C type profile with players prefer.

SpeciesIndonesian mahogany
ProfileStandard C-shape
Thickness1 3/4-inch at nut
Truss rod2-way action
JointDovetail
ConstructionJoint at 14th fret

Wood drying

Three stages of drying

The wood is dried by natural, thermal and high frequency vacuum drying. In the case of high-frequency vacuum drying, moisture is removed from the inside of the wood, so there is little splitting or distortion coming from drying.

※ Only carefully selected timber that is well dried and seasoned is used.

Wood Drying Technique of HEX Guitars
HEX Sting acoustic guitars' fretboard

Fretboard

Hard and even frets

On rosewood fingerboard, the 160Hv frets with 30% increased hardness deliver a durable and clear sound. It also reduces the risk of the fret lifting.

SpeciesRosewood
Scale length25 1/2-inch
Radius12 3/5-inch
ProfileRound edge
Frets20 / 160Hv hardness
InlaysHexagon wood at 3rd fret / white PVC dot on side

Rounded edges

Comfortable grip

Both sides of the fingerboard are gently curved for more comfortable playing. In addition, the rounded corners give you easier to play.

Round Edges on Fretboard of HEX guitars
HEX Sting acoustic guitars' headstock

Headstock

Layered with bevel cut

The rosewood top affixed to the headstock contributes to the instrument’s aesthetic quality while helping to improve sustain, and in concert with the binding gives off a feeling of luxury. The 15:1 gear ratio die-cast head machines allow for precise tuning.

TypeHEX® special
Angle14 degrees
LogoSilver metal “HEX”
TopRosewood 3mm thickness
TunersChrome diecast
Tuning ratio15:1
BindingBevel cut

Nut and saddle

Premium oiled bone

The natural material, oiled bone gives clear tone, is easy to set it up and less discolored. The nut with a width of 44mm and E to E spacing of 37.2mm is optimized for both finger style and strum-based performance.

MaterialOiled bone
Nut1 3/4-inch width
E to E1.464-inch
Saddle2 13/16-inch width
HEX acoustic guitars' oil bone nut
HEX acoustic guitars' rosewood bridge

Bridge

Traditional solid rosewood

A special cut is placed in front of the bridge-pin hole to prevent pins from protruding. It also reduces dents on the bridge by string tension. By the increased angle of strings to the saddle, it will be in tune though powerful strum.

TypeHEX® shape rosewood
PlateSolid hard maple w/ honeycomb holes
PinABS BK w/ white dot

Bridge plate

Vibrating structure

Just beneath the bridge on the underside of the sound board is a discreetly affixed honeycomb-shaped solid hard maple bridge plate. Because the hexagonal structure reduces weight while reinforcing the sturdiness of the instrument, it contributes to elongating the time of sustained vibration from the sound board. Additionally, this unique bridge plate assists in balancing the whole sound of the instrument, maintaining it’s tonal character.

HEX acoustic guitars' solid hard maple bridge plate with honeycomb holes
HEX Sting acoustic guitars' abalone rosette

Decoration

Premium grade details

It is decorated with an abalone rosette and multiple body bindings. Transparent pickguard is enclosed, and the D'Addario® EXP16 coated strings are installed.

RosetteBlack/ivory ABS + abalone 1 ring
BindingsBlack & Ivory ABS 4-ply
PickguardClear teardrop shape
StringsD'Addario® EXP16

Finish

Thin and light

Thin finished body will give you a more enriched sound. Electrostatic painting is sprayed thinly and evenly on the surface of the guitar, and the final gloss finish has been applied neatly by master builder's hand spray. The gloss finish gives a highly reflective, extravagant appearance. Additionally, it effectively protects against contaminants and is easily maintained.

ColorNatural
ProcessGloss
HEX guitars' wood finish techniques
HEX HG100 premium gig bag for acoustic guitars

Gig-bag

Light weight, serious protection

Our gig bag will protect the instruments from collisions and contaminants with special paddings and waterproof outer-fabrics. Its neat design and fine fabrics provide premium performances and appearances.

TypeHG100 standard gig bag
Pad10mm sponge
ExteriorBlack polyester fiber
InteriorBlack fabric

Electronics (For D350CE)

No compromise

It is equipped with a Fishman® Sonitone no-cut preamplifier and pickup set. Easy to replace a pickup set attached to the bottom of the top wood without machining the side of the body.

Pre-amplifierFishman® Sonitone
PickupFishman® Sonicore under saddle
ControlVolume / Tone
Battery9-Volt
Battery life111 hours
Output1/4" unbalanced jack
Hex hornet acoustic guitar's electronics
HEX Sting D350 acoustic guitars
HEX Sting D350CE acoustic guitars

BODY
Shape Dreadnought
TopSolid sitka spruce w/ Woofer Line
Sides & BackRosewood
BracingHEX® scalloped X-brace
RosetteBlack/ivory ABS + abalone 1 ring
Top bindingBlack & Ivory ABS 4-ply
Back bindingBlack & Ivory ABS 3-ply
Center bindingBlack & Ivory ABS 5-ply on back & side
NECK
SpeciesIndonesian mahogany
ProfileStandard C-shape
Thickness1 3/4-inch at nut
Truss rod2-way action
JointDovetail
ConstructionJoint at 14th fret
FinishMatte
FINGERBOARD
SpeciesRosewood
Scale length25 1/2-inch
Radius12 3/5-inch
ProfileRound edge
BindingBlack ABS
Frets20 / 160Hv hardness
InlaysHexagon wood at 3rd fret / white PVC dot on side
NUT & SADDLE
MaterialOiled bone
Nut1 3/4-inch width
E to E1.464-inch
Saddle2 13/16-inch width
HEAD
TypeHEX® special
Angle14 degrees
LogoSilver metal “HEX”
TopRosewood
TunersChrome diecast
Tuning ratio15:1
BindingBevel cut
BRIDGE
TypeHEX® shape rosewood
PlateSoild hard maple w/ honeycomb holes
PinABS BK w/ white dot
HARDWARES
PickguardClear teardrop shape
Strap buttonsChrome color
StringsD'Addario® EXP16
FINISH
ColorNatural
ProcessGloss
Case
TypeHG100 premium gig bag
Pad10mm sponge
ExteriorBlack polyester fiber
InteriorBlack fabric
ELECTRONICS (D350CE only)
Pre-amplifierFishman® Sonitone
PickupFishman® Sonicore under saddle
ControlVolume / Tone
Battery9-Volt
Battery life111 hours
Output1/4" unbalanced jack

acoustic-guitar-dimension
A1033 mm
B505 mm
C289 mm
D394 mm
E459 mm
F44 mm
G100 mm
H120 mm
I648 mm

Sting D350 • D350CE

Updated on 2017-10-09T21:29:22+00:00, by hexguitars.